Pleasing Pressure Washer Pump Repair News
July 17, 2010 2:40 am BusinessBegin by removing the air cleaner box. You will discover three bolts from the bottom that are access by removing the filter. Be careful when separating the several air line form the box. Begin by breaking loose the higher pressure line. This is a 5/8″ hex on most Jeeps. Remove the low pressure return line as well. Loosen the jam nut within the belt adjuster under the pump and loosen the drive belt. Next eliminate the three bolts about the back on the power steering pump. Remove the pivot bolt for the front in the pump. Remove the bracket and pump as an assembly. Use a pulley removal tool to take out the plastic pulley from the pump. Most Auto parts stores have these as loaners for this job. Put the two halves in the puller together above the groove within the pulley as well as the tool. Slide the sleeve around the two halves. Turn the bolt to press off the pulley. You may wish to find more info on my site dealing with Pressure Washer Pump Repair.
